PROGRAMMABLE SPIN COATING UNIT:- MAKE: HE (GMP/ISO 9001 – 2015/GMP/CE Certified ) Model: HSC – 8000 Technical Specification: - • Polypropylene Working Chamber (removable), size 6-inch dia, with transparent photo resist lid with interlock safety switch. • 500 – 8000 RPM • Accuracy<±0.5% of Full Speed • Microprocessor Programmable Speed control with respect to time Preset editable programs of 1 program X 64 step • Real time display of RPM, time and program stamps • Nonvolatile program memory • Input & control through soft touch key pad. • Vacuum release switch • Substrate size from 0. 04sq.inch (28 sq.mm) to 4.0 sq. inch (for glass substrate) & 20.0 sq. inch (for silicon wafers) • Vacuum chuck: derlin made circular substrate holders of Dia 0.5”,1”,1.5”,2.0” inch • Microprocessor control A C brush less motor • Acceleration 2000 rpm/sec (Maximum) use settable • Calibration option. • Vacuum Dial gauge. • Frame: Epoxy coated MS. • Facility for interlocking with Vacuum Pump. • Tubing for Vacuum. • Gas Purging Attachment for Nitrogen. • Spill drainage facility • To operate on 230V ± 10%, 1 phase 50 Hz AC only. • Maximum Power 190W, Current 1.0 Amp. Vacuum Pump: - Make: HE (NSIC Regd, MSME Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE Certified) Model Technical Name HE115 N Flow rate 50 Hz 42 L/min 60 Hz 60 Hz 50 L/min Ultimate vacuum Partial Pressure Total Pressure Total Pressure Power Inlet Port

VACUUM OVEN: Make: HE (GMP / ISO 9001 – 2015 / CE Mark) Vacuum Oven is used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry sterilization, purification and out gassing of solids etc. We are vacuum oven manufacturers and suppliers in India. In our factory, these ovens are made in both rectangular and cylindrical (round) shapes with temperature range up to 130°C (400°C optional). Each unit delivers excellent durability for long run. Below are vacuum oven technical specifications. Detailed Description Design: Our vacuum ovens are designed in both rectangular and square chamber and round chamber as required and the capacity is available from 6 liters to 21 liters or more. Construction: A vacuum oven must be made rugged and leak proof; therefore, we make these units thick gauge of stainless-steel sheets, fabricated and jointed with arc welding and nicely designed. Exterior cabinet is usually made of powder coated GI sheet; while the inner chamber is made of stainless steel 304L supported with high density Ceramic wool insulation. We also make GMP vacuum oven having both inner and outer made of stainless steel (316L). Vacuum: The vacuum is achieved better than -750mmHg or 28 psi. Standard vacuum oven units are equipped with dial type analog vacuum gauge of 30psi range. As an option, we also fit imported digital vacuum display and controller for precise accuracy. Vacuum intake and release valves are fitted on either side of unit. Door: The door is also made of thick gauge of steel with toughened glass and durable clamp to close the door. With silicone gasket at chamber, the door ensures leak proof performance Temperature: The temperature range of standard vacuum oven is ambient +5°C to 250°C, which is controlled through microprocessor based PID temperature controller having dual display of set value (SV) and process value (PV). It is supported with PT100 temperature sensor. Options: We offer several optional accessories with our vacuum ovens such as oil free vacuum pump, data logging, digital timer and caster wheels with brake at bottom. We also equip your vacuum oven with highly advanced PLC based HMI controller which not only offers temperature settings but also provides vacuum control, digital vacuum display and data monitoring with USB interface to transfer data into pen drive. Technical Specifications: - Chamber design Round Vacuum range Up to -760 mmHg Temperature range Ambient+5°C to 250°C Temp. Accuracy: ± 1ºC Temperature sensor PT100 Temperature controller Digital PID controller Display of SV & PV Inner chamber Hermetically welded stainless steel 316 sheet External cabinet Powder coated GI sheet Door Solid door with clamp & toughened glass window Gasket High temperature silicon gasket Shelves Removable SS shelves Vacuum fittings Vacuum valve / exhaust valves (Rubber hose) Standard fittings Mains on/off switch Vacuum pump on/off switch Electric socket for vacuum pump Power supply 220 Volts 50Hz With Vacuum Pump-: With Vacuum Pump:- Make: HE (NSIC Regd, MSME Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE Certified) Model Technical Name HE115 N Flow rate 50 Hz 42 L/min 60 Hz 60 Hz 50 L/min Ultimate vacuum Partial Pressure Total Pressure Total Pressure Power Inlet Port Model Technical Name HE115 N Flow rate Model Inner Size= Dia x Depth Power Supply Price HVO 400 x 400 220V/ 10 KW

VACUUM OVEN: Make: HE (GMP / ISO 9001 – 2015 / CE Mark) Vacuum Oven is used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry sterilization, purification and out gassing of solids etc. We are vacuum oven manufacturers and suppliers in India. In our factory, these ovens are made in both rectangular and cylindrical (round) shapes with temperature range up to 130°C (400°C optional). Each unit delivers excellent durability for long run. Below are vacuum oven technical specifications. Detailed Description Design: Our vacuum ovens are designed in both rectangular and square chamber and round chamber as required and the capacity is available from 6 liters to 21 liters or more. Construction: A vacuum oven must be made rugged and leak proof; therefore, we make these units thick gauge of stainless-steel sheets, fabricated and jointed with arc welding and nicely designed. Exterior cabinet is usually made of powder coated GI sheet; while the inner chamber is made of stainless steel 304L supported with high density Ceramic wool insulation. We also make GMP vacuum oven having both inner and outer made of stainless steel (316L). Vacuum: The vacuum is achieved better than -750mmHg or 28 psi. Standard vacuum oven units are equipped with dial type analog vacuum gauge of 30psi range. As an option, we also fit imported digital vacuum display and controller for precise accuracy. Vacuum intake and release valves are fitted on either side of unit. Door: The door is also made of thick gauge of steel with toughened glass and durable clamp to close the door. With silicone gasket at chamber, the door ensures leak proof performance Temperature: The temperature range of standard vacuum oven is ambient +5°C to 250°C, which is controlled through microprocessor based PID temperature controller having dual display of set value (SV) and process value (PV). It is supported with PT100 temperature sensor. Options: We offer several optional accessories with our vacuum ovens such as oil free vacuum pump, data logging, digital timer and caster wheels with brake at bottom. We also equip your vacuum oven with highly advanced PLC based HMI controller which not only offers temperature settings but also provides vacuum control, digital vacuum display and data monitoring with USB interface to transfer data into pen drive. Technical Specifications: - Chamber design Round Vacuum range Up to -760 mmHg Temperature range Ambient+5°C to 250°C Temp. Accuracy: ± 1ºC Temperature sensor PT100 Temperature controller Digital PID controller Display of SV & PV Inner chamber Hermetically welded stainless steel 316 sheet External cabinet Powder coated GI sheet Door Solid door with clamp & toughened glass window Gasket High temperature silicon gasket Shelves Removable SS shelves Vacuum fittings Vacuum valve / exhaust valves (Rubber hose) Standard fittings Mains on/off switch Vacuum pump on/off switch Electric socket for vacuum pump Power supply 220 Volts 50Hz With Vacuum Pump-: With Vacuum Pump:- Make: HE (NSIC Regd, MSME Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE Certified) Model Technical Name HE115 N Flow rate 50 Hz 42 L/min 60 Hz 60 Hz 50 L/min Ultimate vacuum Partial Pressure Total Pressure Total Pressure Power Inlet Port Model Technical Name HE115 N Flow rate Model Inner Size= Dia x Depth Power Supply Size-: HVO 300mm x 300mm 220V/ 8 KW

VACUUM OVEN: Make: HE (GMP / ISO 9001 – 2015 / CE Mark) Vacuum Oven is used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry sterilization, purification and out gassing of solids etc. We are vacuum oven manufacturers and suppliers in India. In our factory, these ovens are made in both rectangular and cylindrical (round) shapes with temperature range up to 130°C (400°C optional). Each unit delivers excellent durability for long run. Below are vacuum oven technical specifications. Detailed Description Design: Our vacuum ovens are designed in both rectangular and square chamber and round chamber as required and the capacity is available from 6 liters to 21 liters or more. Construction: A vacuum oven must be made rugged and leak proof; therefore, we make these units thick gauge of stainless-steel sheets, fabricated and jointed with arc welding and nicely designed. Exterior cabinet is usually made of powder coated GI sheet; while the inner chamber is made of stainless steel 304L supported with high density Ceramic wool insulation. We also make GMP vacuum oven having both inner and outer made of stainless steel (316L). Vacuum: The vacuum is achieved better than -750mmHg or 28 psi. Standard vacuum oven units are equipped with dial type analog vacuum gauge of 30psi range. As an option, we also fit imported digital vacuum display and controller for precise accuracy. Vacuum intake and release valves are fitted on either side of unit. Door: The door is also made of thick gauge of steel with toughened glass and durable clamp to close the door. With silicone gasket at chamber, the door ensures leak proof performance Temperature: The temperature range of standard vacuum oven is ambient +5°C to 250°C, which is controlled through microprocessor based PID temperature controller having dual display of set value (SV) and process value (PV). It is supported with PT100 temperature sensor. Options: We offer several optional accessories with our vacuum ovens such as oil free vacuum pump, data logging, digital timer and caster wheels with brake at bottom. We also equip your vacuum oven with highly advanced PLC based HMI controller which not only offers temperature settings but also provides vacuum control, digital vacuum display and data monitoring with USB interface to transfer data into pen drive. Technical Specifications: - Chamber design Round Vacuum range Up to -760 mmHg Temperature range Ambient+5°C to 250°C Temp. Accuracy: ± 1ºC Temperature sensor PT100 Temperature controller Digital PID controller Display of SV & PV Inner chamber Hermetically welded stainless steel 316 sheet External cabinet Powder coated GI sheet Door Solid door with clamp & toughened glass window Gasket High temperature silicon gasket Shelves Removable SS shelves Vacuum fittings Vacuum valve / exhaust valves (Rubber hose) Standard fittings Mains on/off switch Vacuum pump on/off switch Electric socket for vacuum pump Power supply 220 Volts 50Hz With Vacuum Pump-: With Vacuum Pump:- Make: HE (NSIC Regd, MSME Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE Certified) Model Technical Name HE115 N Flow rate 50 Hz 42 L/min 60 Hz 60 Hz 50 L/min Ultimate vacuum Partial Pressure Total Pressure Total Pressure Power Inlet Port Model Technical Name HE115 N Flow rate Model Inner Size= Dia x Depth Power Supply Size-: HVO 350mm x 350mm 220V/ 7 KW

VACUUM OVEN: Make: HE (GMP / ISO 9001 – 2015 / CE Mark) Vacuum Oven is used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry sterilization, purification and out gassing of solids etc. We are vacuum oven manufacturers and suppliers in India. In our factory, these ovens are made in both rectangular and cylindrical (round) shapes with temperature range up to 130°C (400°C optional). Each unit delivers excellent durability for long run. Below are vacuum oven technical specifications. Detailed Description Design: Our vacuum ovens are designed in both rectangular and square chamber and round chamber as required and the capacity is available from 6 liters to 21 liters or more. Construction: A vacuum oven must be made rugged and leak proof; therefore, we make these units thick gauge of stainless-steel sheets, fabricated and jointed with arc welding and nicely designed. Exterior cabinet is usually made of powder coated GI sheet; while the inner chamber is made of stainless steel 304L supported with high density Ceramic wool insulation. We also make GMP vacuum oven having both inner and outer made of stainless steel (316L). Vacuum: The vacuum is achieved better than -750mmHg or 28 psi. Standard vacuum oven units are equipped with dial type analog vacuum gauge of 30psi range. As an option, we also fit imported digital vacuum display and controller for precise accuracy. Vacuum intake and release valves are fitted on either side of unit. Door: The door is also made of thick gauge of steel with toughened glass and durable clamp to close the door. With silicone gasket at chamber, the door ensures leak proof performance Temperature: The temperature range of standard vacuum oven is ambient +5°C to 250°C, which is controlled through microprocessor based PID temperature controller having dual display of set value (SV) and process value (PV). It is supported with PT100 temperature sensor. Options: We offer several optional accessories with our vacuum ovens such as oil free vacuum pump, data logging, digital timer and caster wheels with brake at bottom. We also equip your vacuum oven with highly advanced PLC based HMI controller which not only offers temperature settings but also provides vacuum control, digital vacuum display and data monitoring with USB interface to transfer data into pen drive. Technical Specifications: - Chamber design Round Vacuum range Up to -760 mmHg Temperature range Ambient+5°C to 250°C Temp. Accuracy: ± 1ºC Temperature sensor PT100 Temperature controller Digital PID controller Display of SV & PV Inner chamber Hermetically welded stainless steel 316 sheet External cabinet Powder coated GI sheet Door Solid door with clamp & toughened glass window Gasket High temperature silicon gasket Shelves Removable SS shelves Vacuum fittings Vacuum valve / exhaust valves (Rubber hose) Standard fittings Mains on/off switch Vacuum pump on/off switch Electric socket for vacuum pump Power supply 220 Volts 50Hz With Vacuum Pump-: With Vacuum Pump:- Make: HE (NSIC Regd, MSME Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE Certified) Model Technical Name HE115 N Flow rate 50 Hz 42 L/min 60 Hz 60 Hz 50 L/min Ultimate vacuum Partial Pressure Total Pressure Total Pressure Power Inlet Port Model Technical Name HE115 N Flow rate Model Inner Size= Dia x Depth Power Supply Size-: HVO 250mm x 250mm 220V/ 7 KW

Application:- 1200°C Tube Furnace (Programmable) is Mainly Provides High Temperature Heat Treatment Environment For Industrial, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Tube Adopts Quartz Tube As Carrier And The Light Weight Aluminium Flanges On Its Both Ends Are Simple Design, Reasonable, Easy To Disassemble And Convenient For Entering And Leaving Sintered Samples.  Furnace Material Is High-Purity Ceramic Fiber Zirconia Grade Materials, New Assembly Structure, and No Transformation In Long Term High Temperature, Sturdy And Durable.  Using Intelligent PID Temperature Control Instrument, With 1 Program Function, Can Set The Temperature Rise Curve, Can Be Programmed 16 Segments.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  The Heating Element Is Made Of Kanthal – A1 Wire, Coil Type With End Connections, Which Can Bear Large Load, Stable And Long Service Life.  High Precision of Temperature Accuracy ±1°C.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  Electronic Components Are Used Such as Autonics / Schneider / L&T Brand, it’s safe and Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically.  It can be installed with a Gas Mass Rotameter, Manual Precise Control of the Gas. Product Overview:- HE-STF-1200P – Singal Zone Tube Furnace - 1200℃ Series Products Are Mainly Applied For The Heat Treatment Of Samples Under Vacuum Or Protective Atmosphere, High Quality Chamber Materials And Stable Temperature Control System Ensure The Reliability Of Experiment. The Product Uses The Zirconia Grade Ceramic Fiber Material As The Furnace Chamber Material; The Furnace Tube Material Is Fine, And The Tube Is Sealed By Light Weight Aluminium Flanges On Its Both Ends, The Furnace Can Be Work Under The Vacuum, There Are Air Inlet And Air Outlet On The Flange, Also It Can Be Filled In Protective Air, The Precision Needle-Valve May Adjust The Air Inlet Flow Rate. Specification:- Type Two Zone Split Type Max Temperature 1200℃ Continue Operating Temp. 1150℃ Heating Element Kanthal “A-1” Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE Certified Furnace Shell High Quality GI Sheet With PP Powder Coated Accessories One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual Optional Quartz / Alumina Bot Warranty  One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions  The cooling rate of this Split Tube Furnace 1200 type shall also not exceed 8℃ /min.  Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence Model Hot Zone Length 1 power Supply HE-STF-1200P 300 mm 220 V/ 5 KW Single Phase

 Temperature Range: The standard temperature range of a laboratory hot air oven is ambient+5°C to 250°C.  Temperature Controller: We always equip our hot air oven with imported and branded PID temperature controllers that feature auto-tuning and display both set value (SV) and process value (PV). It is also responsible for accuracy of temperature during the entire cycle. RTD PT100 sensor has sensitivity of ± 1°C or better.  Heating Element: Sheathed Tubular air heaters are considered best for hot air ovens; these elements are ISI mark and from reputed brands in the market and offer fast heat up using minimum energy consumption.  Air Circulation: In order to achieve better uniformity across the chamber, air circulation is mandatory; therefore, we use only branded motor and blower assembly for this purpose. It is fitted at back side of the chamber as per convenient.  Construction: Rugged construction is prime requisite of any hot air oven; therefore, we use only stainless steel (304) of thick gauge that are nicely jointed through arc welding. External cabinet is usually made of powder coated GI sheet and for GMP models stainless sheets are used.  Customization: We understand the requirement of customization; therefore, we offer number of optional features and accessories with our hot air oven such as toughened glass viewing window, perforated stainless steel shelves, 21CFR based controller, data logging and monitoring device, programmable soak timer, color touch screen controller etc. TECHNICAL SPECIFICATIONS :- Temperature range Ambient +5°C to 250°C Temperature accuracy ±1°C or better Temperature sensor RTD PT100 Temperature controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type.  Over temperature protection and alarm allows for operation without attendant Construction Double walled Inner chamber Stainless steel 304 Exterior Powder coated GI sheet Insulation Ceramic Wool Shelves Chrome plated wire mesh cable trays (removable) Door Insulated solid door with spring latch Door gasket Silicone Gasket Air circulation Motor driven blower assembly Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Safety Over temperature thermostat Power supply 220/230 Volts / 1 Phase Supply

 Temperature Range: The standard temperature range of a laboratory hot air oven is ambient+5°C to 250°C.  Temperature Controller: We always equip our hot air oven with imported and branded PID temperature controllers that feature auto-tuning and display both set value (SV) and process value (PV). It is also responsible for accuracy of temperature during the entire cycle. RTD PT100 sensor has sensitivity of ± 1°C or better.  Heating Element: Sheathed Tubular air heaters are considered best for hot air ovens; these elements are ISI mark and from reputed brands in the market and offer fast heat up using minimum energy consumption.  Air Circulation: In order to achieve better uniformity across the chamber, air circulation is mandatory; therefore, we use only branded motor and blower assembly for this purpose. It is fitted at back side of the chamber as per convenient.  Construction: Rugged construction is prime requisite of any hot air oven; therefore, we use only stainless steel (304) of thick gauge that are nicely jointed through arc welding. External cabinet is usually made of powder coated GI sheet and for GMP models stainless sheets are used.  Customization: We understand the requirement of customization; therefore, we offer number of optional features and accessories with our hot air oven such as toughened glass viewing window, perforated stainless steel shelves, 21CFR based controller, data logging and monitoring device, programmable soak timer, color touch screen controller etc. TECHNICAL SPECIFICATIONS :- Temperature range Ambient +5°C to 250°C Temperature accuracy ±1°C or better Temperature sensor RTD PT100 Temperature controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type.  Over temperature protection and alarm allows for operation without attendant Construction Double walled Inner chamber Stainless steel 304 Exterior Powder coated GI sheet Insulation Ceramic Wool Shelves Chrome plated wire mesh cable trays (removable) Door Insulated solid door with spring latch Door gasket Silicone Gasket Air circulation Motor driven blower assembly Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Safety Over temperature thermostat Power supply 220/230 Volts / 1 Phase Supply

 Temperature Range: The standard temperature range of a laboratory hot air oven is ambient+5°C to 250°C.  Temperature Controller: We always equip our hot air oven with imported and branded PID temperature controllers that feature auto-tuning and display both set value (SV) and process value (PV). It is also responsible for accuracy of temperature during the entire cycle. RTD PT100 sensor has sensitivity of ± 1°C or better.  Heating Element: Sheathed Tubular air heaters are considered best for hot air ovens; these elements are ISI mark and from reputed brands in the market and offer fast heat up using minimum energy consumption.  Air Circulation: In order to achieve better uniformity across the chamber, air circulation is mandatory; therefore, we use only branded motor and blower assembly for this purpose. It is fitted at back side of the chamber as per convenient.  Construction: Rugged construction is prime requisite of any hot air oven; therefore, we use only stainless steel (304) of thick gauge that are nicely jointed through arc welding. External cabinet is usually made of powder coated GI sheet and for GMP models stainless sheets are used.  Customization: We understand the requirement of customization; therefore, we offer number of optional features and accessories with our hot air oven such as toughened glass viewing window, perforated stainless steel shelves, 21CFR based controller, data logging and monitoring device, programmable soak timer, color touch screen controller etc. TECHNICAL SPECIFICATIONS :- Temperature range Ambient +5°C to 250°C Temperature accuracy ±1°C or better Temperature sensor RTD PT100 Temperature controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type.  Over temperature protection and alarm allows for operation without attendant Construction Double walled Inner chamber Stainless steel 304 Exterior Powder coated GI sheet Insulation Ceramic Wool Shelves Chrome plated wire mesh cable trays (removable) Door Insulated solid door with spring latch Door gasket Silicone Gasket Air circulation Motor driven blower assembly Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Safety Over temperature thermostat Power supply 220/230 Volts / 1 Phase Supply