Standard Fume Hood: -
Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED)
Harrier Standard Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct. Chemical fume hood, fume cupboard and fume closet are similar names of fume hood.
FUME HOOD APPLICATIONS
The core application of a Standard fume hood is fume removal also minimizing nuisance doors. It is used in laboratory where some important tasks are preformed such as solvent mixing, soldering and working with volatile organics, powder and flammable chemicals, different types of acids and low door thresholds etc. and all these tasks generate hazardous fumes that are harmful not only environment but also for operator and surrounding people. In this case a Standard fume hood becomes important which sucks fumes and throws outside the working environment to maintain acceptable air quality aiming for enhancing safety of personnel as well as laboratory environment.
WORKING CHAMBER
Inner working chamber or area is the most important part of fume hood which remains in direct contact of fumes, acids and different types of chemicals. We make inner chamber walls of stainless steel (304) which is further coated with FRP layer if needed. The Sizes of chamber are 7 ft x 3 ft x 3 ft etc.
WORK BENCH
The work bench of fume hood is either made of granite marble.
EXTERNAL SURFACE
External surface is either made of stainless-steel sheet (304).
SERVICE VALVES
Service valves are added (02 Nos) Both Sides we can fit wet and dry service valves (brass needle valves) for raw water, nitrogen gas, air and vacuum.
ELECTRICAL UTILITIES
To run the apparatus inside fume hood, we fit electrical sockets 1 x 2.
SASH
It is a glass window mechanism which is moved up and down using sash track. Sash track is a system made of weights and a pulley. Operator can easily move sash up or down and keep at desired height during work.
BLOWER
For suction in fume hood, we provide centrifugal blower assemble made of direct drive motor of any branded make.
CHEMICAL STORAGE CABINET
At the bottom of fume hood, we provide ventilated cabinet to store chemicals.
Technical Specifications Inner chamber: SS 304 Exterior: Stainless Steel Work top: Jet black granite
Illumination: Fluorescent tube light (02 Nos)
Blower: Centrifugal exhaust blower (direct drive motor) Standard fittings: Water tap
Sink with drainage system Electrical sockets
Keywords
SS 304
Water tap
raw water
FRP layer
dust mist
NSIC REGD
sash track
prime work
fume closet
nitrogen gas
CE CERTIFIED
fume removal
fume exhaust
similar names
fume cupboard
chemical fumes
desired height
important part
solvent mixing
nuisance doors
direct contact
granite marble
hazardous fumes
important tasks
drainage system
different types
service fixture
EXTERNAL SURFACE
core application
CHEMICAL STORAGE
volatile organics
electrical points
Standard fittings
ventilated cabinet
electrical sockets
surrounding people
Chemical fume hood
dry service valves
direct drive motor
heavy duty blowers
flammable chemicals
working environment
inner chamber walls
air borne particles
brass needle valves
low door thresholds
ELECTRICAL UTILITIES
contamination source
Stainless Steel Work
laboratory fume hood
stainless-steel sheet
Inner working chamber
laboratory environment
FUME HOOD APPLICATIONS
acceptable air quality
Fluorescent tube light
glass window mechanism
fume ventilation system
marble stone work bench
Technical Specifications
Centrifugal exhaust blower
Harrier Standard Fume Hood
centrifugal blower assemble
Jet black granite Illumination
