Muffle Furnace (Programmable):-
Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED)
Application:-
1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials.
Features:-
The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.
The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal APM Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.
The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.
High Precision of Temperature Accuracy ±1°C.
PID automatic control via SSR power control with phase angle fired, current limiting resistor.
1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.
Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.
Over temperature protection and alarm allows for operation without attendant
Electronic Components Are Used Such As Autonics / Schneider / L& T Brand, its Safe And Reliable.
The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.
When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically.
Product Overview: -
HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements
Specification:-
Type Benchtop
Max Temperature 1200℃
Continue Operating Temp. 1150℃
Heating Element Kanthal “A-1” Grade Wire in Coil Form
Insulation First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.
Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.
High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity
Temperature Accuracy ±1℃
Thermocouple K type (Pt-Rh) with 99.7% purity Alumina tube
Temperature Controller PID automatic control via SSR power control with phase angle fired, current limiting resistor.
1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.
Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.
Over temperature protection and alarm allows for operation without attendant
Electronic Component Autonics / Schneider / L& T Electronics Brands
Heating Rate ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace)
Safety Protection Overheat And Thermocouple-Break Alarm
Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED
Furnace Shell High Quality GI Sheet With PP Powder Coated
Using Attentions The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.
Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
Small cracks may appear on the surface of the refractory ceramics over extended use.
This is a normal occurrence and the cracks may be repaired with alumina coating.
Refractory door block must be inserted before closing door.
MODEL SIZE CAPACITY POWER
HE-MF-28-1200P (W X H X D) in MM
300 x 300 x 300 28 Ltrs 220V/ 8 KW
Keywords
8 KW
Low Load
Coil Form
Next Work
NSIC REGD
W X H X D
Run Button
dwell time
L& T Brand
120 Minutes
First layer
phase angle
1150 Degrees
extended use
Small cracks
Alarm Signal
CE CERTIFIED
closing door
cooling rate
New Materials
Type Benchtop
Heat Capacity
Second layer
Operating Temp
Nano Materials
High Precision
explosive gases
Working Process
Metal Materials
Good Uniformity
Max Temperature
alumina coating
precise control
A-1” Grade Wire
Room Temperature
Brick insulation
PP Powder Coated
Protection Action
normal occurrence
Ceramic Materials
Longer Life Using
Long Service Life
SSR power control
Ltrs 220V
Instrument Program
Research Institutes
broken thermocouple
refractory ceramics
Industrial Colleges
Thermocouple K type
Temperature Accuracy
The Furnace Material
Electronic Components
Refractory door block
1200°C Muffle Furnace
PID automatic control
The Kanthal APM Grade
temperature protection
PID Auto-Tune function
Zirconia Fiber Blanket
Semiconductor Materials
Heating Element Kanthal
Muffle Furnace 1200 type
Muffle Furnace 1400 type
necessary safety controls
current limiting resistor
99.7% purity Alumina tube
1260℃ ceramic fiber board
1430℃ ceramic fiber board
The Temperature Controller
Safety Protection Overheat
Precise Temperature Control
HE-MF 1200℃ Series Products
Box Type Resistance Furnace
Temperature Field Uniformity
1 programmable x 16 segments
Electronic Component Autonics
Daily Application Development
Other Industrial Laboratories
High-Quality Furnace Materials
High-Quality Kanthal “A-1” Grade
Stable Temperature Control System
Microprocessor PID Control Module
Furnace Shell High Quality GI Sheet
L& T Electronics Brands Heating Rate
Thermocouple-Break Alarm Certification
Light weight ceramic Fiber wool insulation
High Temperature Heat Treatment Environment
Vacuum-Formed Alumina Ceramic Fiber Material
Constant Temperature Requirements Specification
MODEL SIZE CAPACITY POWER
High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material
