Application:- 1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal APM Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements Specification:- Type Benchtop Max Temperature 1200℃ Continue Operating Temp. 1150℃ Heating Element Kanthal “A-1” Grade Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Using Attentions  The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating.  Refractory door block must be inserted before closing door.

Heat Treatment Furnace (Programmable):- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED ) Application:- 1200°C Heat Treatment Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal "A-1" Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-HTF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements

Rectangular Muffle Furnace:- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Application:- 1400°C High Temp Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Silicon Carbide Rod, Which Can Bear Large Load, Stable And Long Service Life; The Silicon Carbide Rod Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, Generally 0-15℃/Min To Be Set Freely.  High Precision of Temperature Accuracy ±1°C.  Using Intelligent PID Temperature Control Instrument, With 1 Program Function, Can Set The Temperature Rise Curve, Can Be Programmed 16 Segments.  Electronic Components Are Used Such as Autonics / Schneider / L&T Brand, It’s Safe and Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-HTIF 1400℃ Series Products Are Mainly For The Daily Application Development Of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability Of The Experimental Data; The Product Uses High-Purity Alumina Material As The Furnace Material, And The High-Quality Silicon Carbide Rod Is Used For Heating Element, And Programmable Temperature Controller PID Module To Achieve Precise Temperature Control And Constant Temperature Requirements.

1400°C High Temp Muffle Furnace:- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Application:- 1400°C High Temp Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Silicon Carbide Rod, Which Can Bear Large Load, Stable And Long Service Life; The Silicon Carbide Rod Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, Generally 0-15℃/Min To Be Set Freely.  High Precision of Temperature Accuracy ±1°C.  Using Intelligent PID Temperature Control Instrument, With 1 Program Function, Can Set The Temperature Rise Curve, Can Be Programmed 16 Segments.  Electronic Components Are Used Such as Autonics / Schneider / L&T Brand, It’s Safe and Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-HTIF 1400℃ Series Products Are Mainly For The Daily Application Development Of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability Of The Experimental Data; The Product Uses High-Purity Alumina Material As The Furnace Material, And The High-Quality Silicon Carbide Rod Is Used For Heating Element, And Programmable Temperature Controller PID Module To Achieve Precise Temperature Control And Constant Temperature Requirements. Specification:- Type Table Top Model Furnace Structure Alumina Ceramic Chamber, Programmable Temperature Control System, Heating Element, Furnace Shell, Main Electric Parts and Other Relative Accessories. Max Temperature 1400℃ Continue Operating Temp. 1350℃ Heating Element Quality Silicon Carbide Rod (Sic) Heater Chamber Material High Temperature 1500 Type Alumina Ceramic Fiber Material Temperature Accuracy ±1℃ Thermocouple R Type Temperature Controller Using Intelligent PID Temperature Control Instrument, With 1 Program Function, Can Set The Temperature Rise Curve, Can Be Programmed 16 Segments. Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Door Manual Furnace Shell High Quality GI Sheet With PP Powder Coated Insulation High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Accessories One Pair of High Temperature Furnace Gloves One No of Tong and Operational Manual Warranty  One-year limited warranty for this Heat Treatment Furnace.  Furnace type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Optional Quartz / Alumina Crucible Using Attentions  The cooling rate for this Heat Treatment Furnace 1400 type shall also not exceed 15℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating. Refractory door block must be inserted before closing door.

Muffle Furnace (Programmable):- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED ) Application:- 1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal APM Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements Specification:- Type: Table Top Max Temperature: 1200℃ Continue Operating Temp. 1150℃ Heating Element: Kanthal “A-1” Grade Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  Triple Layer: High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Temperature Accuracy: ±1℃ Thermocouple: K type (Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate: ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification: NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell: High Quality GI Sheet With PP Powder Coated Warranty  One-year limited warranty for this Muffle Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions  The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating.  Refractory door block must be inserted before closing door.

Hydrothermal Autoclave: - Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Description: The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) lined hydrothermal autoclave reactors. Hydrothermal reactor mainly made up of two parts; outer high-quality stainless-steel (304 & 316 Customer on Demand) jacket and inner PTFE liner chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 260-degree Celsius (500 Fahrenheit), while the safe temperature is 260-degree Celsius. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. Specifications of PTFE Lined Autoclave: • Hydrothermal Autoclave: 2000 ml, • Maximum operating temperature: ≤260°C • Working temperature: – 240°C • Working Pressure: ≤3MPa or 30 Bar • Heating and Cooling Rate: ≤5°C/min • Material: Shell made of high-quality nonmagnetic 304 stainless steel • Easy to handle • Threads are very smooth to lock and unlock • Can be customized as per requirement • Primary screw type cap for basic tightening • Secondary cap has been provided at the top of the reactor thorough (Allen Key Bolt) for extra tightening to avoid leakage • Customized stainless-steel jacket/autoclave of SS 316 can also be provided if needed, which is better for corrosive materials.

Hydrothermal Autoclave: - Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Description: The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) lined hydrothermal autoclave reactors. Hydrothermal reactor mainly made up of two parts; outer high-quality stainless-steel (304 & 316 Customer on Demand) jacket and inner PTFE liner chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 260-degree Celsius (500 Fahrenheit), while the safe temperature is 260-degree Celsius. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. Specifications of PTFE Lined Autoclave: • Hydrothermal Autoclave: 1000 ml, • Maximum operating temperature: ≤260°C • Working temperature: – 240°C • Working Pressure: ≤3MPa or 30 Bar • Heating and Cooling Rate: ≤5°C/min • Material: Shell made of high-quality nonmagnetic 304 stainless steel • Easy to handle • Threads are very smooth to lock and unlock • Can be customized as per requirement • Primary screw type cap for basic tightening • Secondary cap has been provided at the top of the reactor thorough (Allen Key Bolt) for extra tightening to avoid leakage • Customized stainless-steel jacket/autoclave of SS 316 can also be provided if needed, which is better for corrosive materials.

Hydrothermal Autoclave: - Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Description: The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) lined hydrothermal autoclave reactors. Hydrothermal reactor mainly made up of two parts; outer high-quality stainless-steel (304 & 316 Customer on Demand) jacket and inner PTFE liner chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 260-degree Celsius (500 Fahrenheit), while the safe temperature is 260-degree Celsius. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. Specifications of PTFE Lined Autoclave: • Hydrothermal Autoclave: 500 ml, • Maximum operating temperature: ≤260°C • Working temperature: – 240°C • Working Pressure: ≤3MPa or 30 Bar • Heating and Cooling Rate: ≤5°C/min • Material: Shell made of high-quality nonmagnetic 304 stainless steel • Easy to handle • Threads are very smooth to lock and unlock • Can be customized as per requirement • Primary screw type cap for basic tightening • Secondary cap has been provided at the top of the reactor thorough (Allen Key Bolt) for extra tightening to avoid leakage • Customized stainless-steel jacket/autoclave of SS 316 can also be provided if needed, which is better for corrosive materials.

Hydrothermal Autoclave: - Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Description: The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) lined hydrothermal autoclave reactors. Hydrothermal reactor mainly made up of two parts; outer high-quality stainless-steel (304 & 316 Customer on Demand) jacket and inner PTFE liner chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 260-degree Celsius (500 Fahrenheit), while the safe temperature is 260-degree Celsius. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. Specifications of PTFE Lined Autoclave: • Hydrothermal Autoclave: 50 ml, • Maximum operating temperature: ≤260°C • Working temperature: – 240°C • Working Pressure: ≤3MPa or 30 Bar • Heating and Cooling Rate: ≤5°C/min • Material: Shell made of high-quality nonmagnetic 304 stainless steel • Easy to handle • Threads are very smooth to lock and unlock • Can be customized as per requirement • Primary screw type cap for basic tightening • Secondary cap has been provided at the top of the reactor thorough (Allen Key Bolt) for extra tightening to avoid leakage • Customized stainless-steel jacket/autoclave of SS 316 can also be provided if needed, which is better for corrosive materials.