Application of Split Tube Furnace 1200 Degree 1200°C Split Tube Furnace (Programmable) is Mainly Provides High Temperature Heat Treatment Environment For Industrial, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Product Specification Model HE-STF-(1700/1400p/1200p) Maximum Temp 1700/1400/1200 Degree Working Temp 1600/1350/1150 Degree Temp Accuracy 1 degree Heating Elements Molybdenum Disilicide Heating Element Easily Replaced Power Supply 220 Volts 3 phases AC Supply 415 Volts, 3 Phases AC Supplu Product Specification Type Single Zone Split Type Max Temperature 1200℃ Continue Operating Temp. 1150℃ Heating Element Kanthal “A-1” Wire in Coil Form Insulation ➢ First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket. ➢ Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket. ➢ High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube Temperature Controller ➢ PID automatic control via SSR power control with phase angle fired, current limiting resistor. ➢ 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time. ➢ Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type. ➢ Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE Certified Furnace Shell High Quality GI Sheet With PP Powder Coated Accessories One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual Optional Quartz / Alumina Bot Warranty ➢ One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions ➢ The cooling rate of this Split Tube Furnace 1200 type shall also not exceed 8℃ /min. ➢ Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision. ➢ Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence

Two Zone Split Tube Furnace 1200°C Two-zone split tube furnaces are typically used for applications that require precise temperature control or for applications where the use of different atmospheres is necessary. Some common applications for two-zone split tube furnaces include: Two-zone split tube furnaces are available in a variety of sizes and temperature ranges. The size of the furnace will determine how many samples can be heated at once, while the temperature range will determine the types of materials that can be heated in the furnace. Application 1200°C Two Zone Split Tube Furnace Mainly Provides High Temperature Heat Treatment Environment for Industrial, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Technical Specifications Type Two Zone Split Type Max Temperature Zone 1 1200℃ Max Temperature Zone 2 1200℃ Continue Operating Temp. Zone 1 1150℃ Continue Operating Temp. Zone 2 1150℃ Heating Element Kanthal “A-1” Wire in Coil Form Insulation ➢ First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket. ➢ Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket. ➢ Third Layer: High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity. Temperature Accuracy ±1℃ Accuracy Thermocouple K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube for Each Zone Temperature Controller ➢ PID automatic control via SSR power control with phase angle fired, current limiting resistor. ➢ 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time. ➢ Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split tube Furnace 1200 Type. ➢ Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min for Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, MSME REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Power Supply 220 V, Single Phase AC SUPPLY Warranty ➢ One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, Tube, crucibles are not covered by the warranty, please order the replacement at related products) ➢ ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions ➢ The cooling rate of this Split Tube Furnace1200 type shall also not exceed 10℃/min. ➢ Toxic or explosive gases are not recommended for use with this Two Zone Split Tube Furnace without necessary safety controls and supervision. ➢ Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence

Muffle Furnace (Programmable):- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED ) Application:- 1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal "A-1" Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements Specification:- Type: Table Top Max Temperature: 1200℃ Continue Operating Temp.: 1150℃ Heating Element Kanthal “A-1” Grade Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  Triple Layer: High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple: K type (Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification: NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Warranty  One-year limited warranty for this Muffle Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions  The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating.  Refractory door block must be inserted before closing door. MODEL: HE-MF-95-1200P SIZE: (W X H X D) in mm 450 X 450 X 450 CAPACITY: 95 Ltr POWER: 415 V/ 14 KW

Muffle Furnace (Programmable):- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED ) Application:- 1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal APM Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements Specification:- Type Table Top Max Temperature 1200℃ Continue Operating Temp. 1150℃ Heating Element Kanthal “A-1” Grade Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  Triple Layer: High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Warranty  One-year limited warranty for this Muffle Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions  The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating.  Refractory door block must be inserted before closing door. MODEL: HE-MF-42-1200P SIZE: (W X H X D) in inches 12" X 12" X 18 CAPACITY: 42 Ltr POWER: 415V / 12KW

Muffle Furnace (Programmable):- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED ) Application:- 1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal APM Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements Specification:- Type Table Top Max Temperature 1200℃ Continue Operating Temp. 1150℃ Heating Element Kanthal “A-1” Grade Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  Triple Layer: High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Warranty  One-year limited warranty for this Muffle Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions  The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating.  Refractory door block must be inserted before closing door. MODEL: HE-MF-27-1200P SIZE: (W X H X D) in mm / 300 X 300 X 300 CAPACITY: 27 Ltrs POWER: 220 V/ 9 KW

Muffle Furnace (Programmable):- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED ) Application:- 1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal APM Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements Specification:- Type: Table Top Max Temperature: 1200℃ Continue Operating Temp.: 1150℃ Heating Element: Kanthal “A-1” Grade Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  Triple Layer: High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component: Autonics / Schneider / L&T Electronics Brands Heating Rate: ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace) Safety Protection: Overheat And Thermocouple-Break Alarm Certification: NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell : High Quality GI Sheet With PP Powder Coated Warranty: One-year limited warranty for this Muffle Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions  The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating.  Refractory door block must be inserted before closing door. MODEL: HE-MF-1000-1200P SIZE : (W X H X D) in mm 8" X 8" X 12" CAPACITY: 12 Ltr POWER: 220V/ 7 KW

Muffle Furnace (Programmable):- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED ) Application:- 1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal APM Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements Specification:- Type: Table Top Max Temperature: 1200℃ Continue Operating Temp.: 1150℃ Heating Element: Kanthal “A-1” Grade Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  Triple Layer: High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Temperature Accuracy: ±1℃ Thermocouple: K type (Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component: Autonics / Schneider / L&T Electronics Brands Heating Rate: ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace) Safety Protection: Overheat And Thermocouple-Break Alarm Certification: NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Warranty: One-year limited warranty for this Muffle Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions  The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating.  Refractory door block must be inserted before closing door. MODEL: HE-MF-1000-1200P SIZE (W X H X D) in mm - 6" x 6" x 12 CAPACITY - 7 L POWER: 220V/5 KW

Application:- 1200°C Tube Furnace (Programmable) is Mainly Provides High Temperature Heat Treatment Environment For Industrial, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Tube Adopts Quartz Tube As Carrier And The Light Weight Aluminium Flanges On Its Both Ends Are Simple Design, Reasonable, Easy To Disassemble And Convenient For Entering And Leaving Sintered Samples.  Furnace Material Is High-Purity Ceramic Fiber Zirconia Grade Materials, New Assembly Structure, and No Transformation In Long Term High Temperature, Sturdy And Durable.  Using Intelligent PID Temperature Control Instrument, With 1 Program Function, Can Set The Temperature Rise Curve, Can Be Programmed 16 Segments.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  The Heating Element Is Made Of Kanthal – A1 Wire, Coil Type With End Connections, Which Can Bear Large Load, Stable And Long Service Life.  High Precision of Temperature Accuracy ±1°C.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  Electronic Components Are Used Such as Autonics / Schneider / L&T Brand, it’s safe and Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically.  It can be installed with a Gas Mass Rotameter, Manual Precise Control of the Gas. Product Overview:- HE-STF-1200P – Singal Zone Tube Furnace - 1200℃ Series Products Are Mainly Applied For The Heat Treatment Of Samples Under Vacuum Or Protective Atmosphere, High Quality Chamber Materials And Stable Temperature Control System Ensure The Reliability Of Experiment. The Product Uses The Zirconia Grade Ceramic Fiber Material As The Furnace Chamber Material; The Furnace Tube Material Is Fine, And The Tube Is Sealed By Light Weight Aluminium Flanges On Its Both Ends, The Furnace Can Be Work Under The Vacuum, There Are Air Inlet And Air Outlet On The Flange, Also It Can Be Filled In Protective Air, The Precision Needle-Valve May Adjust The Air Inlet Flow Rate. Specification:- Type Two Zone Split Type Max Temperature 1200℃ Continue Operating Temp. 1150℃ Heating Element Kanthal “A-1” Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE Certified Furnace Shell High Quality GI Sheet With PP Powder Coated Accessories One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual Optional Quartz / Alumina Bot Warranty  One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions  The cooling rate of this Split Tube Furnace 1200 type shall also not exceed 8℃ /min.  Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence Model Hot Zone Length 1 power Supply HE-STF-1200P 300 mm 220 V/ 5 KW Single Phase

Application:- 1200°C Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Kanthal “A-1” Grade as Heating Element, Which Can Bear Low Load, Stable And Long Service Life; The Kanthal APM Grade Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 120 Minutes.  High Precision of Temperature Accuracy ±1°C.  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant  Electronic Components Are Used Such As Autonics / Schneider / L&T Brand, its Safe And Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-MF 1200℃ Series Products Are Mainly For The Daily Application Development of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability of The Experiment; The Product Uses Light weight ceramic Fiber wool insulation (instead of Brick insulation) As The Furnace Material, And The Kanthal “A-1” Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements Specification:- Type Benchtop Max Temperature 1200℃ Continue Operating Temp. 1150℃ Heating Element Kanthal “A-1” Grade Wire in Coil Form Insulation  First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.  Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.  High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh) with 99.7% purity Alumina tube Temperature Controller  PID automatic control via SSR power control with phase angle fired, current limiting resistor.  1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.  Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 0℃ TO 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Using Attentions  The cooling rate for this Muffle Furnace 1200 type shall also not exceed 10℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating.  Refractory door block must be inserted before closing door.