vertical split tube furnace is a type of laboratory furnace that has a chamber that can be divided into two or more sections. The chamber is typically cylindrical in shape, and the sections are separated by a refractory barrier. This allows for the independent heating of different samples or for the use of different atmospheres in different sections of the furnace. Application of Vertical Tube Furnaces: 1200°C Vertical Tube Furnace (Programmable) is Mainly Provides High Temperature Heat Treatment Environment For Industrial, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Product Specification Type Vertical Tube Furnace Max Temperature 1200℃ Continue Operating Temp. 1150℃ Heating Element Kanthal “A-1” Wire in Coil Form Insulation ➢ First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket. ➢ Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket. ➢ High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube Temperature Controller ➢ PID automatic control via SSR power control with phase angle fired, current limiting resistor. ➢ 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time. ➢ Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type. ➢ Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE Certified Furnace Shell High Quality GI Sheet With PP Powder Coated Accessories One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual Optional Quartz / Alumina Bot Warranty ➢ One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions ➢ The cooling rate of this Split Tube Furnace 1200 type shall also not exceed 8℃ /min. ➢ Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision. ➢ Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence

Cylindrical Tube Furnace Manufacturer in India A cylindrical tube furnace is a type of laboratory furnace that has a cylindrical chamber. The chamber is typically made of a refractory material, such as mullite or zirconia, which can withstand high temperatures without melting. The heating element is usually made of molybdenum disilicide, which is a high-temperature metal that can withstand temperatures up to 1800°C. Application 1200°C Cylindrical Tube Furnace (Programmable) is Mainly Provides High Temperature Heat Treatment Environment For Industrial, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Product Specification Type Cylindrical Tube Furnace Max Temperature 1200℃/1400°C Continue Operating Temp. 1150℃/1350°C Heating Element Kanthal “A-1” Wire in Coil Form Insulation ➢ First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket. ➢ Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket. ➢ High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube Temperature Controller ➢ PID automatic control via SSR power control with phase angle fired, current limiting resistor. ➢ 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time. ➢ Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type. ➢ Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE Certified Furnace Shell High Quality GI Sheet With PP Powder Coated Accessories One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual Optional Quartz / Alumina Bot Warranty ➢ One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions ➢ The cooling rate of this Split Tube Furnace 1200 type shall also not exceed 8℃ /min. ➢ Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision. ➢ Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence

1400°C High Temp Muffle Furnace:- Make: HE ( NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Application:- 1400°C High Temp Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment for Industrial Colleges, Research Institutes, Factories and Other Industrial Laboratories, And Is Applied to New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Features:-  The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.  The Heating Element Is Made Of High-Quality Silicon Carbide Rod, Which Can Bear Large Load, Stable And Long Service Life; The Silicon Carbide Rod Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.  The Heating Rate Is Fast, Generally 0-15℃/Min To Be Set Freely.  High Precision of Temperature Accuracy ±1°C.  Using Intelligent PID Temperature Control Instrument, With 1 Program Function, Can Set The Temperature Rise Curve, Can Be Programmed 16 Segments.  Electronic Components Are Used Such as Autonics / Schneider / L&T Brand, It’s Safe and Reliable.  The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.  When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. Product Overview:- HE-HTIF 1400℃ Series Products Are Mainly For The Daily Application Development Of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability Of The Experimental Data; The Product Uses High-Purity Alumina Material As The Furnace Material, And The High-Quality Silicon Carbide Rod Is Used For Heating Element, And Programmable Temperature Controller PID Module To Achieve Precise Temperature Control And Constant Temperature Requirements. Specification:- Type Table Top Model Furnace Structure Alumina Ceramic Chamber, Programmable Temperature Control System, Heating Element, Furnace Shell, Main Electric Parts and Other Relative Accessories. Max Temperature 1400℃ Continue Operating Temp. 1350℃ Heating Element Quality Silicon Carbide Rod (Sic) Heater Chamber Material High Temperature 1500 Type Alumina Ceramic Fiber Material Temperature Accuracy ±1℃ Thermocouple R Type Temperature Controller Using Intelligent PID Temperature Control Instrument, With 1 Program Function, Can Set The Temperature Rise Curve, Can Be Programmed 16 Segments. Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Door Manual Furnace Shell High Quality GI Sheet With PP Powder Coated Insulation High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Accessories One Pair of High Temperature Furnace Gloves One No of Tong and Operational Manual Warranty  One-year limited warranty for this Heat Treatment Furnace.  Furnace type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Optional Quartz / Alumina Crucible Using Attentions  The cooling rate for this Heat Treatment Furnace 1400 type shall also not exceed 15℃ /min.  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.  Small cracks may appear on the surface of the refractory ceramics over extended use.  This is a normal occurrence and the cracks may be repaired with alumina coating. Refractory door block must be inserted before closing door.

Application of Split Tube Furnace 1400 Degree 1400°C High Temp Split Tube Furnace Mainly Provides High Temperature Heat Treatment Environment For Industrial, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Single Zone Split Tube Furnace Product Specification Model HE-STF-(1700/1400p/1200p) Maximum Temp 1700/1400/1200 Degree Working Temp 1600/1350/1150 Degree Temp Accuracy 1 degree Heating Elements Molybdenum Disilicide Heating Element Easily Replaced Power Supply 220 Volts 3 phases AC Supply 415 Volts, 3 Phases AC Supplu Product Specification Type Single Zone Split Type Furnace Structure Chamber Material, Temperature Controller System, Heating Element, Furnace Shell And Other Assistant Parts. Max Temperature 1400℃ Continue Operating Temp. 1350℃ Heating Element Silicon Carbide Heating elements, with end connection, easily replaceable Chamber Material High Temperature Zirconia Grade Ceramic Fiber Material Temperature Accuracy ±1℃ Thermocouple R Type Temperature Controller ➢ PID automatic control via SSR power control with phase angle fired, current limiting resistor. ➢ 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time. ➢ Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type. ➢ Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Insulation High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity Accessories One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual Optional Quartz / Alumina Bot Warranty ➢ One-year limited warranty for this Split Tube Furnace 1400 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions ➢ The cooling rate of this Split Tube Furnace 1400 type shall also not exceed 10℃ /min. ➢ Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision. ➢ Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence

Hydrothermal Autoclave: - Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Description: The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) lined hydrothermal autoclave reactors. Hydrothermal reactor mainly made up of two parts; outer high-quality stainless-steel (304 & 316 Customer on Demand) jacket and inner PTFE liner chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 260-degree Celsius (500 Fahrenheit), while the safe temperature is 260-degree Celsius. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. Specifications of PTFE Lined Autoclave: • Hydrothermal Autoclave: 2000 ml, • Maximum operating temperature: ≤260°C • Working temperature: – 240°C • Working Pressure: ≤3MPa or 30 Bar • Heating and Cooling Rate: ≤5°C/min • Material: Shell made of high-quality nonmagnetic 304 stainless steel • Easy to handle • Threads are very smooth to lock and unlock • Can be customized as per requirement • Primary screw type cap for basic tightening • Secondary cap has been provided at the top of the reactor thorough (Allen Key Bolt) for extra tightening to avoid leakage • Customized stainless-steel jacket/autoclave of SS 316 can also be provided if needed, which is better for corrosive materials.

Hydrothermal Autoclave: - Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Description: The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) lined hydrothermal autoclave reactors. Hydrothermal reactor mainly made up of two parts; outer high-quality stainless-steel (304 & 316 Customer on Demand) jacket and inner PTFE liner chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 260-degree Celsius (500 Fahrenheit), while the safe temperature is 260-degree Celsius. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. Specifications of PTFE Lined Autoclave: • Hydrothermal Autoclave: 1000 ml, • Maximum operating temperature: ≤260°C • Working temperature: – 240°C • Working Pressure: ≤3MPa or 30 Bar • Heating and Cooling Rate: ≤5°C/min • Material: Shell made of high-quality nonmagnetic 304 stainless steel • Easy to handle • Threads are very smooth to lock and unlock • Can be customized as per requirement • Primary screw type cap for basic tightening • Secondary cap has been provided at the top of the reactor thorough (Allen Key Bolt) for extra tightening to avoid leakage • Customized stainless-steel jacket/autoclave of SS 316 can also be provided if needed, which is better for corrosive materials.

Hydrothermal Autoclave: - Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Description: The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) lined hydrothermal autoclave reactors. Hydrothermal reactor mainly made up of two parts; outer high-quality stainless-steel (304 & 316 Customer on Demand) jacket and inner PTFE liner chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 260-degree Celsius (500 Fahrenheit), while the safe temperature is 260-degree Celsius. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. Specifications of PTFE Lined Autoclave: • Hydrothermal Autoclave: 500 ml, • Maximum operating temperature: ≤260°C • Working temperature: – 240°C • Working Pressure: ≤3MPa or 30 Bar • Heating and Cooling Rate: ≤5°C/min • Material: Shell made of high-quality nonmagnetic 304 stainless steel • Easy to handle • Threads are very smooth to lock and unlock • Can be customized as per requirement • Primary screw type cap for basic tightening • Secondary cap has been provided at the top of the reactor thorough (Allen Key Bolt) for extra tightening to avoid leakage • Customized stainless-steel jacket/autoclave of SS 316 can also be provided if needed, which is better for corrosive materials.

VACUUM OVEN: Make: HE (GMP / ISO 9001 – 2015 / CE Mark) Vacuum Oven is used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry sterilization, purification and out gassing of solids etc. We are vacuum oven manufacturers and suppliers in India. In our factory, these ovens are made in both rectangular and cylindrical (round) shapes with temperature range up to 130°C (400°C optional). Each unit delivers excellent durability for long run. Below are vacuum oven technical specifications. Detailed Description Design: Our vacuum ovens are designed in both rectangular and square chamber and round chamber as required and the capacity is available from 6 liters to 21 liters or more. Construction: A vacuum oven must be made rugged and leak proof; therefore, we make these units thick gauge of stainless-steel sheets, fabricated and jointed with arc welding and nicely designed. Exterior cabinet is usually made of powder coated GI sheet; while the inner chamber is made of stainless steel 304L supported with high density Ceramic wool insulation. We also make GMP vacuum oven having both inner and outer made of stainless steel (316L). Vacuum: The vacuum is achieved better than -750mmHg or 28 psi. Standard vacuum oven units are equipped with dial type analog vacuum gauge of 30psi range. As an option, we also fit imported digital vacuum display and controller for precise accuracy. Vacuum intake and release valves are fitted on either side of unit. Door: The door is also made of thick gauge of steel with toughened glass and durable clamp to close the door. With silicone gasket at chamber, the door ensures leak proof performance Temperature: The temperature range of standard vacuum oven is ambient +5°C to 250°C, which is controlled through microprocessor based PID temperature controller having dual display of set value (SV) and process value (PV). It is supported with PT100 temperature sensor. Options: We offer several optional accessories with our vacuum ovens such as oil free vacuum pump, data logging, digital timer and caster wheels with brake at bottom. We also equip your vacuum oven with highly advanced PLC based HMI controller which not only offers temperature settings but also provides vacuum control, digital vacuum display and data monitoring with USB interface to transfer data into pen drive. Technical Specifications: - Chamber design Round Vacuum range Up to -760 mmHg Temperature range Ambient+5°C to 250°C Temp. Accuracy: ± 1ºC Temperature sensor PT100 Temperature controller Digital PID controller Display of SV & PV Inner chamber Hermetically welded stainless steel 316 sheet External cabinet Powder coated GI sheet Door Solid door with clamp & toughened glass window Gasket High temperature silicon gasket Shelves Removable SS shelves Vacuum fittings Vacuum valve / exhaust valves (Rubber hose) Standard fittings Mains on/off switch Vacuum pump on/off switch Electric socket for vacuum pump Power supply 220 Volts 50Hz With Vacuum Pump-: With Vacuum Pump:- Make: HE (NSIC Regd, MSME Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE Certified) Model Technical Name HE115 N Flow rate 50 Hz 42 L/min 60 Hz 60 Hz 50 L/min Ultimate vacuum Partial Pressure Total Pressure Total Pressure Power Inlet Port Model Technical Name HE115 N Flow rate Model Inner Size= Dia x Depth Power Supply Price HVO 400 x 400 220V/ 10 KW

Hydrothermal Autoclave: - Make: HE (NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED) Description: The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. Hydrothermal synthesis reactor generally comes in a two variety; the first is Polytetrafluoroethylene (PTFE) lined hydrothermal autoclave reactors. Hydrothermal reactor mainly made up of two parts; outer high-quality stainless-steel (304 & 316 Customer on Demand) jacket and inner PTFE liner chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 260-degree Celsius (500 Fahrenheit), while the safe temperature is 260-degree Celsius. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. Specifications of PTFE Lined Autoclave: • Hydrothermal Autoclave: 50 ml, • Maximum operating temperature: ≤260°C • Working temperature: – 240°C • Working Pressure: ≤3MPa or 30 Bar • Heating and Cooling Rate: ≤5°C/min • Material: Shell made of high-quality nonmagnetic 304 stainless steel • Easy to handle • Threads are very smooth to lock and unlock • Can be customized as per requirement • Primary screw type cap for basic tightening • Secondary cap has been provided at the top of the reactor thorough (Allen Key Bolt) for extra tightening to avoid leakage • Customized stainless-steel jacket/autoclave of SS 316 can also be provided if needed, which is better for corrosive materials.