Atmosphere Box Furnace: -
The 1200°C Atmosphere box-type resistance furnace mainly provide as high temperature heat treatment environment for industry laboratories such as colleges and universities, scientific research institutes, factories and enterprises, and can be used in the field of new material such as metal materials, ceramic materials, Nano-material, and semiconductor material
Features:-
The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature; Heat Capacity Is Small, Energy Saving Above 50%.
The Heating Element Is Made of High-Quality Kanthal A1 wire in coil form as Heating Element, Which Can Bear Low Load, Stable and Long Service Life; The APM wire Heating element, Is Evenly Arranged On Both Sides Of The Furnace, And The Temperature Field Uniformity Is Good.
The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 240 Minutes.
High Precision of Temperature Accuracy ±1°C.
Using Intelligent PID Temperature Control Instrument. With 1 Program x 16 Segments.
Electronic Components Are Used Such As Autonics / Schneider / L& T Brand, it’s Safe And Reliable.
The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action.
When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically.
Furnace shell :-
1. The shell is made of High-Quality GI Sheet, and the surface is electrostatically resistant and anti- corrosion.
2. Sturdy metal tank shell structure with low furnace surface temperature.
3. Furnace door with flange type sealing structure and manual screw compression with side door way for easier operating.
Refractory material: -
Multi-layer insulation design, composed of lightweight alumina ceramic fiber and other high-quality insulation board heat shielding backing, which does not contain asbestos components, low heat loss and low energy consumption.
Heating system:-
1) High-quality Kanthal A-1 wire in Coil Form heating element, safely and firmly embedded in the furnace surface, free heat radiation heating in the furnace cavity, energy saving and high efficiency with long service life.
2) Heating on three sides (left and right and furnace bottom) for good homogeneity in the furnace.
3) Silicon carbide base plate covers and protects the bottom heating element, high mechanical strength, good thermal conductivity, while providing horizontal load bearing.
Temperature Control Panel:-
1) PID controller with SSR control mode for precise temperature control.
2) International standard K type (Pt-Rh) with 99.7% purity Alumina tube thermocouple, temperature range 0-1150 ℃, long service life.
Program Controller:-
PID automatic control via SSR power control with phase angle fired, current limiting resistor.
1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.
Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1200 type.
Over temperature protection and alarm allows for operation without attendant.
Atmosphere Function:-
1. The furnace tank body has adjustable air inlet and air outlet, which can be passed into the protective gas.
2. Optional air circuit control unit, the control unit can choose 1-3 adjustable float meter
Specification:-
Type Controlled Atmosphere Vacuum Furnace
Max Temp 1200°C
Working Temp 1150°C
Heating Element Kanthal A1” wire in coil form
Temp Accuracy ±1℃
Insulation First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.
Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket
Third Layer: High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity
Thermocouple K type (Pt-Rh) with 99.7% purity Alumina tube
Temperature Controller PID automatic control via SSR power control with phase angle fired, current limiting resistor.
1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.
Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1200 type.
Over temperature protection and alarm allows for operation without attendant
Electronic Component Autonics / Schneider / L& T Electronics Brands
Heating Rate ≤ 10℃/Min (Suggest 0℃ TO 8℃/Min For Longer Life Using of Furnace)
Safety Protection Overheat And Thermocouple-Break Alarm
Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED
Furnace Shell High Quality GI Sheet With PP Powder Coated
Using Attentions The cooling rate for this Atmosphere Box Furnace 1200 type shall also not exceed 10℃ /min.
Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
Small cracks may appear on the surface of the refractory ceramics over extended use.
This is a n
Keywords
Max Temp
Low Load
NSIC REGD
Next Work
dwell time
Run Button
Both Sides
air outlet
L& T Brand
240 Minutes
First layer
phase angle
three sides
1150 Degrees
extended use
Alarm Signal
Small cracks
Working Temp
cooling rate
Furnace door
new material
Third Layer
Temp Accuracy
energy saving
Heat Capacity
side door way
low heat loss
Second layer
protective gas
furnace cavity
PID controller
Heating system
High Precision
explosive gases
Working Process
Good Uniformity
precise control
metal materials
high efficiency
GMP/CE CERTIFIED
good homogeneity
Room Temperature
PP Powder Coated
SSR control mode
Protection Action
temperature range
ceramic materials
Longer Life Using
Long Service Life
SSR power control
furnace tank body
Program Controller
Instrument Program
refractory ceramics
asbestos components
broken thermocouple
Refractory material
Atmosphere Function
Thermocouple K type
Temperature Accuracy
The Furnace Material
adjustable air inlet
industry laboratories
Electronic Components
PID automatic control
High-Quality GI Sheet
temperature protection
Temperature Controller
semiconductor material
low energy consumption
PID Auto-Tune function
bottom heating element
Zirconia Fiber Blanket
horizontal load bearing
manual screw compression
Muffle Furnace 1200 type
high mechanical strength
Temperature Control Panel
necessary safety controls
current limiting resistor
good thermal conductivity
Coil Form heating element
1260℃ ceramic fiber board
1430℃ ceramic fiber board
Safety Protection Overheat
Silicon carbide base plate
precise temperature control
free heat radiation heating
Temperature Field Uniformity
1 programmable x 16 segments
High-Quality Kanthal A1 wire
The APM wire Heating element
Electronic Component Autonics
Multi-layer insulation design
International standard K type
flange type sealing structure
High-quality Kanthal A-1 wire
scientific research institutes
low furnace surface temperature
Atmosphere Box Furnace 1200 type
Heating Element Kanthal A1” wire
lightweight alumina ceramic fiber
Optional air circuit control unit
Sturdy metal tank shell structure
Furnace Shell High Quality GI Sheet
L& T Electronics Brands Heating Rate
Thermocouple-Break Alarm Certification
99.7% purity Alumina tube thermocouple
1-3 adjustable float meter Specification
Type Controlled Atmosphere Vacuum Furnace
high temperature heat treatment environment
Vacuum-Formed Alumina Ceramic Fiber Material
1200°C Atmosphere box-type resistance furnace
Intelligent PID Temperature Control Instrument
other high-quality insulation board heat shielding backing
High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material
