Customized Fume Hoods for Your Laboratory: -
Harrier Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct. Chemical fume hood, fume cupboard and fume closet are similar names of fume hood.
FUME HOOD APPLICATIONS
The core application of a fume hood is fume removal also minimizing nuisance odors. It is used in laboratory where some important tasks are preformed such as solvent mixing, soldering and working with volatile organics, powder and flammable chemicals, different types of acids and low odor thresholds etc. and all these tasks generate hazardous fumes that are harmful not only environment but also for operator and surrounding people. In this case a fume hood becomes important which sucks fumes and throws outside the working environment to maintain acceptable air quality aiming for enhancing safety of personnel as well as laboratory environment.
WORKING CHAMBER
Inner working chamber or area is the most important part of fume hood which remains in direct contact of fumes, acids and different types of chemicals. We make inner chamber walls of stainless steel (304) which is further coated with FRP layer if needed. The Sizes of chamber are 6 ft x 2 ft x 2 ft etc.
WORK BENCH
The work bench of fume hood is either made of granite marble.
EXTERNAL SURFACE
External surface is either made of stainless-steel sheet (304).
SERVICE VALVES
Service valves are added (02 Nos) Both Sides we can fit wet and dry service valves (brass needle valves) for raw water, nitrogen gas, air and vacuum.
ELECTRICAL UTILITIES
To run the apparatus inside fume hood, we fit electrical sockets 4 x 3.
SASH
It is a glass window mechanism which is moved up and down using sash track. Sash track is a system made of weights and a pulley. Operator can easily move sash up or down and keep at desired height during work.
BLOWER
For suction in fume hood, we provide centrifugal blower assemble made of direct drive motor of any branded make.
CHEMICAL STORAGE CABINET
At the bottom of fume hood, we provide ventilated cabinet to store chemicals.
Technical Specifications
Inner chamber: SS 304
Exterior: Stainless Steel
Work top: Jet black granite
Illumination: Fluorescent tube light (02 Nos)
Blower: Centrifugal exhaust blower (direct drive motor)
Standard fittings: Water tap
Sink with drainage system
Electrical sockets
Inner Working Dimension (ft.): 6’ x 2’ x 2’
Keywords
2 ft
6 ft
3 sash
laboratory environment
working chamber
working environment
pulley operator
stainless steel 304
fumes acids
flammable chemicals
chamber walls
important part
important tasks
system made
work blower
desired height
fit wet
added 02 nos
work bench
frp layer
enhancing safety
sucks fumes
surrounding people
core application
similar names
remotely connected
chemical fumes
prime work
contamination source
remove fumes
fume removal
fume hood
fume closet
direct contact
electrical points
fume ventilation system
easily move sash
customized fume hoods
direct drive motor
vacuum electrical utilities
provide ventilated cabinet
glass window mechanism
low odor thresholds
volatile organics powder
solvent mixing soldering
minimizing nuisance odors
air borne particles
